Product profile:The mining reducer test bench is a test device for detecting the performance indicators of the whole machine of the mining reducer. This device tests various performance parameters of the reducer, including: the input torque, speed, and power of the reducer, the output torque, speed, and power, efficiency, temperature rise, vibration noise, etc. This test bench can meet the performance testing of various types of reducers, and provide accurate parameter indicators for evaluating the manufacturing, maintenance, and on-site application of the reducer.
This equipment is used to assess the good performance of the product enclosure and components during the storage, transportation and use in rainy weather.
This is a helium leak detection device for a very large product vacuum box. The vacuum box helium leak detection recovery system is adopted. Helium is recycled to reduce costs. It detects the overall leak rate of the workpiece, and has high leak detection accuracy. The system is mature and reliable, and the layout is reasonable. It is suitable for leak detection of various products.
main components:1. Power supply system: Provides the electrical energy required for testing, including alternating current or direct current.2. Load system: Simulates the load conditions of the motor in actual work, usually including resistance load, torque load, or power load.3. Measurement system: Used to measure various parameters of the motor, such as voltage, current, speed, torque, power, etc.4. Control system: Controls the operation of the test bench, including start, stop, speed regulation, and other operations, as well as data acquisition and processing.5. Console: The operator can perform test settings, parameter adjustments, and monitor the test process through the console.6. Safety protection system: Mining motor test benches may involve dangerous factors such as high voltage and large current, so it is necessary to be equipped with corresponding safety protection devices, such as overload protection, short circuit protection, grounding protection, etc.7. Frame and installation platform: Used to fix and install the various components of the test bench to ensure the stability and reliability of the entire system.8. Data analysis software: Analyzes and processes the measured data, generates test reports, in order to evaluate the performance of the motor. The specific composition of different types and specifications of mining motor test benches may vary, but the above are some common components.
The rain test room complies with the national military standard GJB150.8A-2009 program I rain and rain test, and is used for simulating dynamic operation of military equipment or electronic products in various intensity rain environments, rain test methods and main parameters of military equipment, and wind rain test and rain test can be realized in a test box.
Product introduction:The performance of precision reducers (RV/harmonic/planetary) is comprehensively designed in a modular and integrated manner. The operating part conforms to ergonomic design, and can complete manual/automatic mode control. It is composed of a mechanical system, a drive system, a tested part system, a load system, an electrical system, and an upper computer software system in the form of a combined module.
This Xenon lamp Climate resistance test machine can be used for the selection of new materials, change existing materials or evaluate the durability after the change in material composition, and can well simulate the changes caused by material exposure to sunlight under different environmental conditions.
The cooling, low temperature, constant temperature and damp heat of the equipment provide the required cooling capacity. According to the different test states of the equipment, the refrigeration system will automatically start to provide cooling capacity for the corresponding test process, so as to meet the performance index of the equipment.
Product introduction:The power take-off tester is mainly composed of four parts: the electric dynamometer, the electric dynamometer control system, the drive motor and controller test system, and the motor power supply. This system uses the electric dynamometer as the load (the electric dynamometer control system controls the electric dynamometer to change the load size to meet the test requirements of various standards), which can test the various parameters of the drive motor and controller under different load conditions (the input current, voltage, and power of the driver, the output current, voltage, power of the driver, and the output torque, speed, power of the motor, and the overall efficiency, driver efficiency, and motor efficiency) and the efficiency diagram of the motor characteristic curve.
Product introduction:
The function of the continuous coating production line is that it can carry out coating efficiently and continuously, ensure the consistency and stability of the coating, thereby improving the quality of the product. It is suitable for large-scale production, can realize various functional coatings, and can also save costs, be easy to be automated, and be widely applied, providing support for product innovation.
Composite salt fog tank is the closest to the actual natural situation in accelerated corrosion test, more often simulated in the natural environment: such as salt fog, hot air drying (optional), wet, low temperature and can be any sequential cycle and the test, the main test products are for intense changes in the environment such as auto parts, aviation equipment, building materials, coating, electrical machines, etc.
Air Tightness Helium Leak Test Equipment For Drying Filter Of Auto Air Conditioner, helium gas is used as the tracer gas, and helium gas is filled into the test piece in the vacuum chamber, and then the leakage of the test piece can be quickly and accurately detected by the helium leak detector.