Receive a FREE QUOTE
HCTE PTE, Ltd.
Rapid Temperature Change Test Chamber IEC68
Home /

Environmental Test Equipment

/

Rapid Temperature Change Test Chamber IEC68

Rapid Temperature Change Test Chamber IEC68

Rapid Temperature Change Test Chamber IEC68

It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.

  • Certification :

    Calibration Certificate(cost additional)

  • Price :

    Negotiable

  • Delivery Time :

    30 days

  • Payment Terms :

    L/C, T/T

  • Brand Name :

    HCTE

  • Model Number :

    HCTE0030
Inquiry now

Rapid Temperature Change Test Chamber IEC68

 

Meet The Standards:

GJBl50.9-2009 (MIL-STD-810D) Hot and heat test method;

GJB360.8-2009(MIL-STD.202F) High-temperature life test;

GJBl50.3-2009 (M-I L-STD-810D);High temperature test method

GJBl50.4-2009 (MIL-STD-8 I 0 D);Low temperature test method

GB-2423.1-2008 (IEC68-2-1) Test A: Low temperature test method;

GB-2423.2-2008 (IEC68-2-2) Test B: High temperature test method;

GB2423.3-2008 (IEC68-2-3) Test Ca: Constant heat and humidity test method;

GB2423.4-2008 (IEC68-2-30) Test Db:Alternating humid heat test method

 

Feature:

1.Heater air burning to prevent the protection switch, heater over current circuit breaker, circulating fan overcurrent overload protection.

2.Compressor high-voltage protection switch, compressor overheat protection switch, compressor overcurrent protection switch.

3.Underphase protection switch, circuit breaker, no-fuse switch, zero crossing brake fluid power controller.

4.When the above protection occurs, the equipment stops running and emits a sound and light alarm while displaying the fault position on the instrument.

 

Use The Installation Conditions：

Surrounding environment: Operation guaranteed ambient temperature range: 20~28℃, relative humidity: 85%RH,380V ± 10%V; 50Hz; three-phase four-wire + grounding wire, protective grounding resistance is less than 4 Ω.

 

Parameters:

Model

HCTE0030-KW408

HCTE0030-KW960

HCTE0030-KW1000

Inner box size mm (W * H * D)

800×850×600

1800×1000×800

1000×1000×1000

Outer box size mm (W * H * D)

1060×1880×2300

2200×2050×3350

1700×2200×3000

Temperature range

A:-40～+150℃; B:-50～+150℃;  C:-65～+150℃

Linear speed

3℃/min ；5℃/min ；10℃/min ；15℃/min；20℃/min

Temperature departure

±2.0℃

Temperature fluctuation

±0.5℃

Temperature uniformity

±2.0℃

Temperature raising rate

Heating rate: rise from-55℃ to + 130℃ when the linear 15℃ / min empty load

Cooling: drop from + 130℃ to-55℃ linear 15℃ / min empty load

Humidity range

20%〜98%RH

Humidity deviation

±3.0％RH（＞75％RH），±5.0％RH（≤75％RH）

Humidity uniformity

± 3.0%RH (no-load)

Humidity fluctuation

±2.0％RH

Heater

High quality nickel-chrome combined with gold wire electric heater, contact-free control mode (SSR).

Humidifier

Apply the external wet mode

Water level control device, heater anti-dry heating device.

Heater control mode

No contact control mode (SSR), water level control device, heater anti-drying burning device.

Cooling system

compression engine

A German Bock semi-hermetic compressor or a German Bizer semi-hermetic compressor

cooling medium

Non-fluorine environmental protection refrigerant R404A R23, in accordance with environmental protection regulations, safe and non-toxic.

condensator

Shell-tube-type condenser (water-cooled type).

Evaporator

High performance fin type automatic load capacity adjustment, long-term use of low temperature and high humidity conditions without frosting.

Control

System

 

 

sensor

High-precision grade A PT100Ω

controller

Weinview programmable temperature and humidity controller (7-inch 16-bit real color touch screen)

Control resolution

Temperature: + 0.01℃; humidity: + 0.1%; time: 0.01min.

Internal wall material

SUS304 # fog surface stainless steel plate

External wall material

High quality carbon steel plate, the surface for electrostatic color spray plastic treatment

heat insulating material

Hardcore polyurethane foam insulation layer + fiberglass
Leave a message
Polyester Powder Coating for industry or architectures
Submit
Related Products
Related Products
Xenon test chamber
Xenon Lamp Weatherproof Test Chamber (Air-Cooled Type) ISO 105-B04:1994 ISO4892-2:2006
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Constant temperature and humidity chamber
Walk-In Constant Temperature And Constant Humidity / High And Low Temperature Laboratory
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Salt spray test equipment
Alternating Salt Spray Laboratory
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Salt spray test machine
Salt Fog Test Box For Auto IEC68 IEC61701 IEC60068
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Sand and dust test chamber
Sand Dust Test Room
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Salt spray chamber
Saline Spray Tester
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Blowing sand and dust test chamber
Dust Blowing Test Chamber ISO-20653-2006、GBT-2423.37
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Three comprehensive environment test chamber
Temperature / Humidity / Vibration Three Comprehensive Environment Test Chamber
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Thermal shock test chamber
Three-Box Cold and Hot Impact Tester IEC60068
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Thermal shock chamber
Two-Box Cold and Hot Impact Tester IEC60068
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Dust test chamber
Sand Dust Test Chamber IEC60529 IEC60068 ISO20653
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Environmental Test Equipment
IPX12 Dripping Test Chamber IEC 60529 ISO20653 IEC60068
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Ip testing equipment
IPX34 Rain Test Chamber IEC 60529 ISO20653 IEC60068
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Ipx5 testing
IPX56 Rain Test Chamber IEC 60529 ISO20653 IEC60068
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
High low temperature chamber
High And Low Temperature Low Pressure Test Chamber Auto Parts Test Equipment IEC 60068
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Constant temperature and humidity chamber
Programmable Constant Wet Constant Humidity / High And Low Temperature Chamber IEC68
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Temperature and humidity testing
Rapid Temperature Change Test Chamber IEC68
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Ultraviolet test
UV-Accelerated Aging Chamber ISO4892-3:2006
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Ingress protection test equipment
IPX8 Immersion Pressure Testing Machine IEC60529 ISO20653 IEC60068
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Environmental Test Equipment
National Military Standard Rain Procedure I~III Test Room Turntable Bearing
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Xenon tester
Xenon Lamp Weatherproof Test Chamber ISO105 IEC60068 (Water-Cooled Type)
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Salt fog test machine
Composite Salt Fog Test Machine
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
Ingress protection test equipment
IPX1~8 Waterproof Test System
It is suitable to conduct high and low temperature, wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.
View details
:
Committed to the research and development, manufacturing and sales of laboratory testing instruments and production line testing systems
Get a free quote
Subscribe
To receive more news about Superlink or more valeuable infomation. pleaseleave your information and message.
© 2021 HCTE PTE. LTD.. All Rights Reserved. | XML |
IPv6 network supported

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

whatsApp