Two-Box Cold and Hot Impact Tester IEC60068

Two-Box Cold and Hot Impact Tester IEC60068

The hot and cold impact test machine is to test whether the product has a bad impact due to the rapid changes of high and low temperature without moving the items to be tested. It is a necessary test equipment for metal, plastic, rubber, electrical and electronics, auto parts and other material industry.

Certification :
Calibration Certificate(cost additional)
Price :
Negotiable
Delivery Time :
30 days
Payment Terms :
L/C, T/T
Brand Name :
HCTE
Model Number :
HCTE0031

Inquiry now

Product Details

Two-Box Cold and Hot Impact Tester IEC60068

Meet The Standards：

GJB 150.4-1986 Low-temperature test;

GJB 150.3-1986 High-temperature test;
GJB 150.5-1986 Temperature impact test;
GB / T 5170.2-1996 Temperature test equipment;

GB / T 2423.1-2001（IEC60068-2-1:1990） test A: Low temperature test method;
GB / T 2423.2-2001（IEC60068-2-2:1974）test B: High temperature test method;
GB / T 2423.22-2002（IEC60068-2-14:1984）test N: Temperature change test method test Na.

Two Boxes Of Hot And Cold Impact Technical Indicators：

Model	HCTE0031-LC70	HCTE0031-LC100	HCTE0031-LC150	HCTE0031-LC252
Inner box size mm (W * H * D)	500×350 ×400	500×400×500	600×500×500	700×600×600
Outline dimension mm (W * H * D)	1500×1970×1900	1500×1740×2300	1620×2040×2450	1850×2300×2500
Temperature impact range	A:-40～+150℃， B:-55～+150℃， C:-65～+150℃
Cold storage temperature range in the low temperature area	-10℃～-50℃； -10℃～-65℃； -10℃～-75℃
Heat storage temperature range in the high temperature area	+50℃～+180℃
Impact reinstatement time	About 5min
High and low temperature impact constant temperature time	More than 30min
Nacelle conversion time	≤8S
High temperature setting	+60℃ ～ +150℃
Low temperature setting	-65℃ ～ -10℃
Temperature fluctuation in the sample zone	± 0.5℃ (at constant temperature)
Temperature accuracy range	Set accuracy: ± 0.1℃, indicating accuracy: ± 0.1℃, resolution: ± 0.1℃
Temperature deviation	± 2℃ (no-load, at constant state)
Temperature sensor	High-precision grade A PT100 temperature
Cryogen	R404a，R23
Internal box material	SUS304 stainless steel plate
Outer box material	A3 cold rolled steel plate electrostatic spray on both sides
Heat insulation material	Hard polyurethane foam with insulation cotton
Round-robin mode	Centrifugal fan
Heater	Nickel-branded alloy electric heater
Refrigeration method	Compound refrigeration (using Bizer semi-airtight compressor, Germany)
Controller	The 7-inch color LCD touch control screen + PLC module
Cabas	Built-in 2 shelfs
Running power	About 9~30KW (auto-on heating and cooling based on PID operation)
Supply source	380V ± 10%V; 50Hz; three-phase four-wire + grounding wire, protective grounding resistance is less than 4 Ω
Protection system	Power supply phase deficiency and phase order error protection, leakage protection, heater overtemperature protection, heater short circuit and other overcurrent protection.

Hot Tags :

Leave a message

Polyester Powder Coating for industry or architectures

Subject : Two-Box Cold and Hot Impact Tester IEC60068

Submit

Categories

how can we help you

You can contact us any way that is convenient for you. We are available 24/7 via email or telephone.

Related Products

Related Products

Xenon Lamp Weatherproof Test Chamber (Air-Cooled Type) ISO 105-B04:1994 ISO4892-2:2006

The hot and cold impact test machine is to test whether the product has a bad impact due to the rapid changes of high and low temperature without moving the items to be tested. It is a necessary test equipment for metal, plastic, rubber, electrical and electronics, auto parts and other material industry.

View details