Gb 16410 Gas Cooker Testing Equipment 5.0kw Full Heat Load Coverage Laboratory Grade Accuracy

Gb 16410 Gas Cooker Testing Equipment 5.0kw Full Heat Load Coverage Laboratory Grade Accuracy

Product Introduction

HH-ZJ-507S focuses on laboratory-level precision detection and realizes in-depth analysis of gas stove performance through three core modules:

▎Full-scenario performance detection capability

Thermal performance test:

Thermal load range is 0-5.0kW (resolution 0.01kW), supporting single-burner stoves, double-burner stoves, and multi-burner stoves. It is suitable for natural gas (12T/10T) and liquefied gas (20Y) gas sources, and the gas pressure is adjusted from 500-3500Pa (accuracy ±0.5% FS).

Energy efficiency level test (level 1-3): combustion efficiency ≥63% (level 3) to ≥69% (level 1), thermal efficiency calculation complies with GB 16410 Clause 6.5.2 requirements, with a resolution of 0.1%.

Safety and reliability:

Flame failure protection response time ≤60s (EN 30-1Clause 7.2.3), air tightness detection (1.5 times the working pressure for 30min, leakage ≤0.01L/h).

Electrical safety: grounding resistance ≤0.1Ω, insulation withstand voltage 1800Vdc/1min, adapted to IEC 60335-2-37 anti-electric shock requirements.

▎High-precision sensor matrix

Core detection module:

Gas mass flow meter (±0.5% FS): range 0-5m³/h, real-time monitoring of gas flow fluctuations (resolution 0.01m³/h).

Infrared heat flow sensor (±1% FS): covers 0-100℃ temperature field, accurately captures the heat distribution on the stove surface, and identifies the thermal efficiency loss point.

Flue gas analyzer (CO/NOx resolution 1ppm): Support GB 16410Clause 6.5.3 environmental detection, automatic alarm for over-limit (CO＞0.05%).

Environmental simulation:

Wind pressure simulation 0-1000Pa (accuracy ±1% FS), test the wind resistance of the stove (such as flame stability under 800Pa wind pressure).

Humidity control 10%-95% RH (±1% FS), verify the ignition success rate in a humid environment (≥98%).

▎ Intelligent measurement and control and data management

Operation and analysis:

The 12-inch industrial touch screen (Chinese and English switching) has 8 built-in test templates (CCC certification, Energy Star energy efficiency, CE certification full items), one-click start process, and parameter setting time is shortened by 50%.

Supports custom test scripts (such as simulating ignition at plateau pressure of 80kPa), adapted to laboratory R&D test needs.

Data traceability:

The 128GB solid-state drive automatically records 60+ parameters such as heat load, flow, flue gas composition, and generates PDF reports with CNAS/CMA chapters (including UN/ECE certified data formats).

Supports OPC UA protocol docking with laboratory information management systems (LIMS), with a data traceability period of up to 15 years.

Product Features

Laboratory-level accuracy: ±1% heat load, ±0.5% energy efficiency detection accuracy, 1.2 times better than national standards, adapted to the stringent requirements of international certifications such as UL/CE

Full standard compatibility: Built-in 12 international standards such as GB/EN/CSA, automatically generates multi-language reports (Chinese/English/French/Spanish), supports global certification

Extreme working condition simulation: 3000m altitude low-pressure ignition, -10℃ low-temperature start, 85% RH high humidity environment test, covering global usage scenarios

AI intelligent analysis: machine learning algorithm identifies 7 types of faults such as incomplete combustion and nozzle blockage, and the accuracy of abnormal data warning is >98%

Modular design: quick-detachable gas/wind pressure module, completes gas source switching (natural gas → liquefied gas) within 20 minutes, reducing debugging costs

International reference standards

GB 16410-2020 "Household gas stoves" Clause 6.5: Thermal load and thermal efficiency test methods; Clause 7.2: Flameout protection device requirements.

EN 30-1:2018 "Household gas stoves safety and performance" Clause 5: Combustion performance test; Clause 7: Safety device response time.

CSA 1.1-19 "Gas stoves safety standard" Clause 6: Thermal efficiency calculation; Clause 9: Air tightness test pressure and judgment Energy Star Program "Cooker Energy Efficiency Standard" Section 4: Thermal efficiency ≥ 65% (natural gas stove); Section 5: Standby power consumption ≤ 1W.

GB 30720-2014 "Household gas stoves energy efficiency limit values ​​and energy efficiency grades"Level 1 energy efficiency thermal efficiency ≥ 69% (tabletop stoves), the detection process complies with Clause 5.3.

Test objects and test items

Core test objects

Household gas single-burner stove (0.5-3.0kW).

Two-burner/multi-burner gas stove (1.0-5.0kW).

Embedded/tabletop gas cooker (natural gas/liquefied gas).

Core test items

Thermal performance: rated heat load, thermal efficiency, heat load deviation (≤±10%), flame stability (800Pa wind pressure test).

Energy efficiency evaluation: energy efficiency level (1-3 levels), standby power consumption, partial load efficiency (such as efficiency ≥60% under 50% heat load).

Safety performance: air tightness, flameout protection response time (≤60s), overheating protection temperature (95℃±2℃), grounding resistance (≤0.1Ω).

Environmental performance: flue gas composition (CO≤0.05%, NOx≤150ppm), pollutant emission concentration (GB 16410Clause 6.5.3).

Reliability: 1000 Ignition cycle test (success rate ≥ 99%), nozzle blockage simulation (500 hours of operation with 50μm impurity gas).

Environmental adaptability: low pressure start (85% rated pressure), high altitude combustion test (0-3000m), low temperature start (-10℃ environment).

Technical Parameters