The axle test bench is a device used to test the performance and quality of axles. It can perform various tests on the axle to ensure that it meets relevant standards and requirements.
The helium filling and recovery leak detection system is mainly composed of the helium filling / vacuum detection for major leaks system, the vacuum degassing system, the helium filling pressure boosting system, the helium gas recovery system, the assembly line transmission system, the electrical control system, the suction gun, and the helium mass spectrometer leak detector, etc.
The function of the helium filling and recovery leak detection system is to accurately and quickly find the leak point by filling in helium gas and recycling for detection, ensure the tightness and safety of the detected system or equipment, improve product quality, and avoid the losses and risks caused by leaks.
Product introduction:
Vacuum diffusion welding furnace is a kind of equipment that realizes high-precision welding through atomic diffusion in a vacuum environment. It is applicable to a wide range of materials and can weld a variety of materials. It has the characteristics of high-temperature heating, high control precision, and controllable atmosphere in the furnace, which can improve the joint performance, can be operated automatically, and has a wide range of application fields. In addition, it also has the advantages of reasonable structure, energy saving, and high safety performance.
The inclusion helium inspection machine (sniff gun inspection) adopts the basic principle of helium leak detection using the sniff gun method. It uses helium as a tracer gas, fills the helium gas into the product (workpiece) in the accumulation chamber, and fully mixes the leaked helium. The gas is then detected by the sniffer of the helium mass spectrometer to accurately find the leakage location of the product.
The spring tension testing machine for automobile is mainly used to test the strength of various coil springs and elastic elements, test the test force of springs and elastic elements under a certain amount of deformation, or test the residual height or deformation of springs and elastic elements under a certain test force.
IPX1~8 waterproof test system includes vertical drip rain testing machine, oscillating tube tester for IPX3 and IPX4, spray nozzle, handheld jet nozzle, smart water supply and control system, IPX8 water tightness pressure tester and tiltable rotating stage.
According to QC/T568.1-2011 "Automobile mechanical speed checker bench test method", QC/T29063.1-2011 "Automobile mechanical speed checker assembly technical conditions" and so on to design.It can conduct transmission endurance test, transmission assembly efficiency test, differential fatigue life test, main reducer fatigue life test and simulation of automobile traction and sliding state and other tests.
Compressor Shell Pressure Resistance Test Bench,the piping system adopts stainless steel welded connections. The test medium is hydraulic oil.Two control modes: automatic control, manual control.
The Fuel filter rig test machine is used for testing the contaminant capacity of a filter, its particulate removal characteristics and differential pressure.
It use a multi-pass filtration test with continuous contaminant injection and using the on-line particle counting method for evaluating the performance of diesel fuel and petrol filters for internal combustion engines submitted to a constant flow rate of the test liquid.
Test whether the means of securing non-removable parts that prevent contact with live parts, waterproofing, or contact with moving parts can withstand the mechanical stress that occurs in normal use.
Automotive filter pulse testing machine is specially designed for the test medium of mineral oil hydraulic oil, suitable for high pulse pressure, high pulse frequency, comprehensive test for pipe fitting with small expansion.
The 20N thrust probe is mainly used to check whether the live parts in the protection door are touched while the 1N thrust probe is mainly used to check whether the live parts in the protection door and the live parts with reinforced protective sockets are touched. They are used to test the anti-shock performance of the socket structure.