leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Product Introduction:
The gas detector (diaphragm accumulator) integrates gas compression, detection, and automatic control technologies. It precisely controls the compression and release of gas, enabling efficient and accurate detection that enhances production quality and efficiency while reducing costs.
Certification :
Calibration Certificate(cost additional)Price :
NegotiableDelivery Time :
90 DaysPayment Terms :
L/C, T/TBrand Name :
HCTEModel Number :
HCTE0153Detection Process:
Barcode/QR Code Scanning: Use a barcode scanner to scan the barcode/QR code on the workpiece, and display the scanning result on the computer.
Workpiece Installation: Place the workpiece into the fixture of the testing chamber, press the start button, and the vacuum chamber will automatically close, starting the testing process.
Chamber Testing: The vacuum pump evacuates the chamber, and a pressure sensor monitors the vacuum level. If the vacuum level meets the standard, the process continues; otherwise, the leak indicator light will flash, and the testing ends.
Workpiece Evacuation: The vacuum pump evacuates the workpiece, and the process continues once the set value is reached.
Background Noise Suppression: A leak detector measures the background noise inside the vacuum chamber, and the process continues once it falls within the set range.
Helium Leak Detection: Helium gas is filled into the workpiece, and a leak detector is used to check for leaks. If a micro-leak is detected, the micro-leak indicator light will turn on; otherwise, the qualified indicator light will turn on. After the leak detection is complete, the leak detection valve is closed.
Helium Recovery: Recover helium gas to the set value and then close the recovery valve.
Unload Workpiece: The vacuum chamber automatically opens, and the operator removes the workpiece.
Collaborative Testing: Chambers A and B can work collaboratively, allowing one chamber to test while the other waits or conducts testing simultaneously.
Product Parameters:
|
Vacuum Chamber |
Each vacuum chamber inspects one workpiece |
|
Micro-Leak Detection Gas |
Helium |
|
Workpiece Bulk Leak Detection Gas |
Nitrogen |
|
Workpiece Sealing Method |
Manual sealing |
|
Workpiece Fixture |
Fixtures are equipped according to the production needs of each equipment (3 sets of fixtures are required for diaphragm accumulator; each equipment can only inspect one type of product) |
|
Workpiece Alarm Leak Rate |
≤1×10-6 mbar·L/s |
|
Production Cycle Time |
≤60 seconds per piece (including workpiece loading and unloading) |
|
Helium Recovery Rate |
≥80% |
Hot Tags :
We Provide you with industry leading test equiment
Address : 10 anson road #27-18 international plaza Singapore
E-mail : sales@isoautotest.com
