leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Product Introduction:
The device fills helium into the product in the accumulation chamber, allowing the leaked helium to fully mix. It then uses a suction gun to detect the gas and locate the leakage point of the product.
Certification :
Calibration Certificate(cost additional)Price :
NegotiableDelivery Time :
90 daysPayment Terms :
L/C, T/TBrand Name :
HCTEModel Number :
HCTE0141Product Features:
1. Use a vacuum pump for evacuation, the minimum is -10KPa, which requires fast pumping speed and high reliability.
Low noise.
2. Equipped with air pressure monitoring equipment to ensure that the internal air pressure of the workpiece is at the required value after evacuation;
3. The equipment needs to be equipped with an oil filter to ensure gas cleanliness, and key accessories are imported.
parts to meet performance requirements.
4. Equipped with a pressure gauge to monitor the helium pressure, and automatically adjust the pressure before filling it into the workpiece cavity
in the body;
5. Configure a concentration meter to monitor the helium concentration;
6. The equipment must be equipped with an oil drain device to prevent any impact on the workshop environment. The oil level of the pump unit needs to be directly observable outside the equipment to facilitate inspection and maintenance.
Product Parameters:
|
Dimensions |
≤800*800*1500mm |
|
Detection Gas |
Helium |
|
Output Pressure |
0.1Mpa |
|
Helium Charging Pressure |
0~10KPa(adjustable±0.1KPa) |
|
Helium Charging Concentration |
Configurable (10%-50%) |
|
Helium Charging Cycle Time |
<180 s/PCS |
|
Leak Detection Rate |
1E-3 mbar.L/s |
|
Helium Recovery Efficiency |
Non-recoverable |
|
Noise Level |
≤70dB (at 1 meter from the equipment) |
|
Mass Density |
≤500kg/㎡ |
Hot Tags :
We Provide you with industry leading test equiment
Address : 10 anson road #27-18 international plaza Singapore
E-mail : sales@isoautotest.com
