leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Product Introduction:
The multi-station helium mass spectrometer leak detector utilizes helium for rapid and accurate leak detection in sealed bodies, supporting multi-station operation to enhance efficiency. Widely applied in power, automotive, and refrigeration industries, it ensures product quality and safety.
Certification :
Calibration Certificate(cost additional)Price :
NegotiableDelivery Time :
90 DaysPayment Terms :
L/C, T/TBrand Name :
HCTEModel Number :
HCTE0115Detection Process:
Installation of Workpiece: The operator inserts the workpiece into the fixture hole, initiates the process, and the vacuum chamber closes, commencing the inspection.
Macro Leak Detection: The vacuum pump evacuates the workpiece. If the vacuum level reaches the standard, the process continues; otherwise, a macro leak is indicated and the process ends.
Vacuum Chamber Evacuation: Initial and fine vacuum evacuation are performed to ensure the vacuum level inside the chamber reaches the set value.
Background Suppression: The leak detector measures the background signal inside the chamber and performs suppression processing.
Helium Charging of Workpiece: Helium is charged into the workpiece until the set pressure is reached.
Micro Leak Detection: During the leak detection period, if the leak detector detects helium signals exceeding the standard, it indicates a micro leak; otherwise, the workpiece is deemed qualified.
Recovery and Refill: The workpiece is purged of helium, the vacuum chamber is filled with nitrogen, and the helium in the fine evacuation pipeline is purged.
Removal of Workpiece: The vacuum chamber opens, and the operator removes the workpiece.
Product Parameters:
|
Workpiece to Be Tested |
Relay |
|
Leak Detection Stations |
4 stations,Each station can simultaneously test two workpieces. If only one workpiece is installed, the copper tube hole for the other workpiece will be blocked with a stopper. |
|
Leak Detection Gas |
80% Helium |
|
Leak Detection Pressure |
0.5 MPa |
|
Alarm Leak Rate |
1.0E-8 Pa.m3/sec. |
|
Production Cycle Time |
500 pcs/H |
Hot Tags :
We Provide you with industry leading test equiment
Address : 10 anson road #27-18 international plaza Singapore
E-mail : sales@isoautotest.com
